The first thing to do if you want to build a deck that will increase the home's worth is to hire a contractor. It's a good idea get three written estimates from several contractors. A local contractor is even better. They are more likely be familiar with the local building codes. Additionally, they will have a better knowledge of the materials as well as the design of your new construction. When you've chosen a contractor, make sure to check his or her references and see examples of his or her previous work. Ask about his or her insurance coverage, if possible.
Although hiring a professional may save you money, it could also increase your costs. While pressure-treated lumber can be more durable than regular lumber and is cheaper per board foot, a professional contractor will charge you around $6,400. However, if you're considering putting a fire-pit or other entertainment structure on your deck, keep in mind that this type of structure requires additional materials that may not be available in your area.
A 10x16 deck is a great option to increase the property's value. But the cost can be prohibitive. A 10-x-16 deck can range in price from $7000 - $12000, depending on which materials you choose. A gazebo or grilling space can be added to your deck for $3500-$6000. Cost of a new deck depends on many factors.
When it comes down to selecting the material for your deck the largest factor is its size. Composite decking makes a beautiful, low-maintenance choice. However, it is more expensive. Additionally, the cost of the deck will be a large chunk of the overall cost of your new deck. The decision to build a 10-x16 deck, regardless of whether you use composite or wood, is a smart one.
The cost of a 10x16 deck will vary depending on the type and materials used. A pressure-treated deck of wood will cost you about $15 per square ft, while one that is more intricately built will cost between $35 and $40 per square ft. A 10-by-16 deck will run you about $1500. It all depends on where you are located. Although the cost of your deck will be affected by the materials you choose, it is crucial that your structure works with the rest your house.
While it may not be a huge space, a deck that measures 10x16 can be considered an extension of your house. It can either increase or decrease the property's value, depending on how big it is and where it is located. A hot tub can be a great addition to a 10-foot deck. However, it will require additional steps, railings, and decking. A contractor with experience installing hot tubs up to 10 feet in width will be needed.
FAQ
What Does it Cost to Renovate Your House?
The cost of renovation depends upon the type of material used, the size of the project and the complexity of the job. Some materials like wood need additional tools, like saws or drills, while others like steel don't. The cost of renovations will vary depending on whether your contractor does all the work or you do it yourself.
Home improvement projects cost on average $1,000 to $10,000. The cost to hire professionals would be anywhere from $5,000 to $25,000. On the other hand, if you decide to do the entire task yourself then the total cost could reach up to $100,000.
The final cost for renovation depends on many factors. You should consider the material used, such as brick vs concrete. They include the type of material used (e.g., brick vs. concrete), the size and number of workers involved, as well as the length of each project. These are all important factors to consider when estimating renovation costs.
Do you prefer to hire a general contractor, or a subcontractor for your project?
The cost of hiring a general contractor can be higher than that of a subcontractor. General contractors usually have many employees. This means that they charge their clients much more for labor. On the other hand, a subcontractor only hires one employee, so he or she charges less per hour.
Are there permits needed to renovate my house
Yes. You will need permits to start any home renovation project. In most cases you will need to have a building permit along with a plumber's permit. You may also need a zoning permit depending on the type of construction you are undertaking.
How can I prevent being scammed when renovating my house
Knowing what you're paying for is the best way to avoid being scammed. Be sure to read the fine print before you sign any contract. Blank contracts should not be signed. Always ask for a copy of the signed contract.
Is it better to finish floors or walls first?
It's important to know what you want to accomplish before you start any project. It is essential to consider how the space will be used, who will use it, and why. This will help determine if flooring or wall coverings are best.
If you have decided that you want to create an open plan kitchen/living area then you may choose to install flooring first. If you have chosen to make this room private then you could opt for wall coverings instead.
How important is it to get pre-approved for a loan?
Pre-approval is crucial for getting a mortgage. It gives you an idea how much money it will cost. It helps you to determine if your loan application is eligible.
How much does it take to renovate a home?
Renovations are usually between $5,000 and $50,000. Renovations typically cost homeowners between $10,000 and $20,000
Statistics
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
External Links
How To
How much money do I need to spend on my old house's restoration?
The cost of renovating a home depends on how many rooms it is, what kind of renovations, where it is located, and whether the work will be done by professionals or you. The average cost for renovations is $10,000 to $50,000 depending on how large and complex the project.
If you plan to sell your house after renovations, the value of the home will likely be lower than its market value. This is because you do not take into consideration the costs for repairs, upgrades, or improvements. You could lose money if the home is not maintained in a good condition before selling. On the other hand, if you invest enough time and energy into improving your home's appearance, you could increase the amount you get when you list it for sale.
These are some factors that will help you determine which projects you should start:
-
Your budget. Start small if you have a tight budget. Start small. For instance, you could tackle one room at once, such as replacing flooring or painting walls. A contractor who specializes is kitchen remodeling can be hired to make significant changes in your home without spending a lot.
-
What are your priorities? What are your priorities? Do you want to improve your home's overall condition or fix specific issues? If you choose to tackle only one issue, keep in mind that minor issues can add up quickly. It is possible to end up replacing your roof sooner than anticipated if your roof leaks whenever it rains.
-
Your timeline. If you're thinking about buying another property soon, you might want to prioritize those projects that won't affect the resale value of your current home. You wouldn't, for instance, want to put hardwood floors in your new house or change the bathroom fixtures if you plan to move next year. For these types of updates, you may wait until your house is sold to make the necessary changes.
-
Your skills. Find someone to help you if you don't have the necessary skills. You might hire a cabinet maker if you don't have the skills to build custom cabinets.